特價
Mitutoyo 530-501 Dial Caliper; Range-0-600mm Resolution-0.05mm-1
Mitutoyo 530-501 Dial Caliper; Range-0-600mm Resolution-0.05mm-2Mitutoyo 530-104 Dial Caliper; Range-0-150mm Resolution-0.05mm-6Mitutoyo 530-104 Dial Caliper; Range-0-150mm Resolution-0.05mm-4Mitutoyo 530-104 Dial Caliper; Range-0-150mm Resolution-0.05mm-3

游標卡尺 530-502 測定範圍0-1000mm 解析度0.05mm Mitutoyo 三豐 儀器

NT$29,220 NT$22,935

Mitutoyo 三豐游標卡尺 專業代理 530-502

三豐編號測定範圍解析度
530-5021000mm0.05mm
貨號: mt530-502 分類: , 標籤: ,

商品說明

Mitutoyo Digimatic Caliper 530-502,Range 0-1000mm ,Resolution 0.05mm

Vernier Caliper 0-1000mm

A dual-scale vernier caliper equipped with standard outside and inside jaws. Hardened stainless steel construction with easy-to-read, satin-chromed scales.

The Mitutoyo 530-502 Standard Model Vernier Caliper has an Inch/Metric dual scale with a measuring range of 0 to 1000mm with a Lower Scale Graduation of 0.05mm, Upper Scale Graduation of 1/128″ and an accuracy of +/- 0.05mm. Features a small face angle of 14 degrees which provides easy reading. Measures Outside Diameter, Inside Diameter, depth and steps. Furnished in Satin Stainless Steel with easy reading graduations. Equipped with a lock screw for holding the sliding jaw position allowing the user to get easy measurements.

Mitutoyo No.RangeResolution
530-5021000mm0.05mm

MITUTOYO三豐游標卡尺 

1.游標卡尺是比較精密的測量工具,要輕拿輕放,不得碰撞或跌落地下。使用時不要用來測量粗糙的物體,以免損壞量爪,不用時應置於乾燥地方防止鏽蝕。

2.測量時,應先擰鬆緊固螺釘,移動游標不能用力過猛。兩量爪與待測物的接觸不宜過緊。不能使被夾緊的物體在量爪內挪動。

3.讀數時,視線應與尺面垂直。如需固定讀數,可用緊固螺釘將游標固定在尺身上,防止滑動。

4.實際測量時,對同一長度應多測幾次,取其平均值來消除偶然誤差

游標卡尺使用完畢,用棉紗擦拭乾凈。長期不用時應將它擦上黃油或機油,兩量爪合攏並擰緊緊固螺釘,放入卡尺盒內蓋好。

參考介紹網頁:

游標卡尺- 台灣Wiki
http://www.twwiki.com/wiki/游標卡尺

額外資訊

顯示類型

游標式

測定範圍

0-1000mm